Short answer: yes, if your belt passes two checks: 1¼–1½ inches wide, with a snap or screw closure so the strap end comes free. 1½ inches fits best. Sewn or riveted ends won't work, whatever the width. Every Glory Worn belt already passes both, so there's nothing to measure.
The iBuckle Switch™ Base is the magnetic foundation that mounts to your belt once and stays there, so the buckle can change in seconds. Here's how to check the belt you already love, and what to do if it doesn't make the cut.
What belt width works with the Base?
The Base works with belts 1¼ to 1½ inches wide. 1½ inches fits best, because the Base is designed around it. Width is only half the test, though. The other half is a snap or screw closure, and a belt has to pass both.
Measure across the strap itself, not across the buckle or the tip. Lay the belt flat and run a ruler or tape straight from one edge to the other. If your belt is labeled in millimeters, 1¼ inches is about 32 mm and 1½ inches is about 38 mm.
A strap narrower than 1¼ inches or wider than 1½ inches sits outside the range the Base is made for, even with the right closure. If you're shopping for a strap that already fits the bill, every one of our women's Western belts for switchable buckles works with the Base.
What's the difference between a snap and a screw closure?
Both let the buckle end of a belt open. A snap closure uses press studs you pull apart by hand. A screw closure uses screw posts, often called Chicago screws, that open with a coin or small screwdriver. Either works with the Base at the right width.
Why the closure matters: to put the Base on, the strap end has to come free, fold around the Base and close again. Snaps and screws both open and close, so they're both on the list.
Ready to put it on? Our belt and Base help guide (PDF) shows each step for a snap closure: thread the strap end, fold it back and close both snaps. The wearing your belt help guide (PDF) shows how to put the belt on and take it off.
Why won't a sewn or riveted belt work?
A sewn or riveted end is closed for good. The strap end can't come free, so there's no way to put the Base on without cutting or altering the belt. Those belts aren't compatible, whatever their width.
We don't suggest altering a belt to make it fit. If your favorite belt has a sewn end, keep wearing it the way it is and let a compatible strap carry the Base.
Check your own belt in three steps
- Measure the width. Lay the belt flat and measure straight across the strap. Anything from 1¼ to 1½ inches passes. 1½ inches fits best.
-
Find the closure. Turn the belt over at the buckle end and look at the fold where the strap wraps around the buckle.
- Snaps: round press studs.
- Screws: small posts with a slotted head.
- Stitching: a line of thread across the fold.
- Rivets: smooth metal domes with no slot.
- Make sure the end comes free. Snaps should pull apart by hand. Screws should turn with a coin or small screwdriver. If the fold opens and the strap end comes free, your belt passes.
One thing that trips people up: from the front, a screw post and a rivet can look alike. Check the back. A screw has a slot you can turn, and a rivet doesn't. Still not sure? Ask us about your belt through Glory Worn customer help, and tell us the width and what you see at the fold.
Does belt thickness matter?
We don't set a thickness requirement for the Base. As long as your belt is 1¼ to 1½ inches wide with a snap or screw closure that lets the strap end come free, you're ready for the Base.
Which belts work with the Base out of the box?
Every Glory Worn belt works with the Base, and so does every Glory Worn decorative buckle in this first release. Pick a belt strap and add the Base, or choose a Belt + Base set that includes one Black Base. Either way, the decorative buckle is sold separately.
If you'd rather skip the measuring, a set gives you the belt and the Base together:
- Prairie Lace Belt + Base set, in Black or Tan.
- Turquoise Trail Belt + Base set, in Brown or Black, with floral cutout detailing and turquoise-colored accents.
- Heritage Scroll Belt + Base set, in Brown, Ivory, Black or Tan, with hand-tooled Western scrollwork.
Each set comes in Small, Medium and Large, and those labels describe belt length, not your waist. Before you choose, read how to measure your Western belt size.
Your next step
If your belt passed, all you need is the Base and a buckle. If it didn't, pick a Belt + Base set, which already includes the Base, or pair a Glory Worn strap with the Base. One belt. Many buckles.
Start with the magnetic Base that stays on your belt or one of the sets above, then choose a buckle from our women's Western belt buckles.
For switching steps and belt care, visit Fit & Care, or check our Glory Worn frequently asked questions for more on the system.
Written by the Glory Worn team; read the Glory Worn story.
Base and belt fit: quick answers
My belt is wider than 1½ inches. Will it work with the Base?
No. The Base is made for belts 1¼ to 1½ inches wide, with a snap or screw closure so the strap end comes free. If your favorite runs wider, every Glory Worn belt already works with the Base. See Glory Worn belt straps.
Will the Base work with a buckle I already own?
Only if it's a Glory Worn buckle. Every Glory Worn decorative buckle in this first release fits the Base; buckles from other brands won't. To find one that does, browse women's Western belt buckles.
Do I need tools to use the Base?
Not to change buckles. Once the Base is on your belt, the buckle changes in seconds, with no tools. If your belt has a screw closure, you may need a coin or small screwdriver to open it the first time. The switching steps are on Fit & Care.
What if I buy the Base and my belt doesn't fit it?
Eligible items may be returned within 30 days of delivery when kept as received and only tried on for fit. Run the three steps above before you order, and see shipping and 30-day returns for how returns work.
